Wählen Sie eine
oder mehrere Sprachen aus
0,1,0
- Deutsch
- Englisch
- Chinesisch
- Spanisch
Heben (n)
elevate (v)
Mesh and elevated side frames ensure that stored goods do not fall off the racks.
This sets it apart from a bridge crane, which usually runs on elevated rails.
Platforms built using TPS provide an elevated working platform or a landing between the different flights of a stairway.
hoist (v)
Brakes that are fitted to hoists must apply their full braking action immediately on actuation.
The hoisting devices are usually powered electrically, hydraulically or pneumatically.
A crane trolley with hoist usually moves along the bridge girder, unless the gantry crane features a rail-mounted slewing crane.
lift (v)
It is not intended for continuous lifting operations in automated industrial processes.
Manually operated high-lift pallet trucks are rarely used.
Counterbalance fork-lift trucks are motorised floor conveyors.
lifting (n)
It is not intended for continuous lifting operations in automated industrial processes.
It is screwed to the fastening elements of the Lifting-Door Bearing Sets.
To ensure smooth operation, the lifting door uses a chain and counterweight.
raise (v)
The ESD-safe Tray is a shelf with an all-round raised edge that stops its contents falling off.
However, raised bumps arranged in a circle keep tools in place.
It can be set up for one of two different height ranges - one for a standard sitting position the other for a raised sitting position.
raising (n)
The Table Column Set is a moving device for the separate raising and lowering of a working surface and accessories.
After raising the bar in terms of flexibility, cost-efficiency and quality, the Toyota Production System was taken as the prime example of lean production in action.
The electrical, height-adjustable work bench is a moving device for the separate raising and lowering of the working surface and accessories.
wind (v)
Die Befestigungsscheibe M5 hat eine Sackloch-Bohrung mit Gewinde.
Ihre Geschwindigkeit ist auf sechs Kilometer pro Stunde begrenzt.
Mit den 3 Gewindestiften kann die Einstellung dann fixiert werden.
